[Company Logo Image]  

Home Up Feedback Contents Search

 
AAT ACDCHP AIN7500 AMT ATC ATS HTL SHTL SR6000 SR6000HP TC1000

 

 

srhp.jpg (11867 bytes)

MODEL SR6000HP - Automatic Strip Reinforcer and Hole Punch

The Model SR6000 Automatic Sheet Edge Reinforcing and Hole Punching Machine applies a strip of film along the binding edge of pre cut sheets, hole punches inline, and cuts cleanly to the edge every time. Standard features include enhancements which yield a production takeoff of 5,500 shts/hr with 9" x 11" format. The set up time and change over times average  5 to 10 minutes. The SR6000 handles coated and full body copy stock with no problem using pressure sensitive, heat seal or transfer tape. A special jogging rail will accommodate tabbed sheets.

Features:

Computerized control of machine functions
Batch counter to monitor output
Machine speed can be varied by the simple turn of a dial
Applies tapes from 1/2" to 3/4" widths, pressure sensitive, heat seal and transfer tape
Automatic friction feeder
Easy for setup and operation
Standard 7 hole retractable round hole die set
inline hole punching or can be bypassed with the flip of a switch
Special jogging rail will accommodate tabbed sheets

Options:

Special die configurations quoted based on customer requirements
Air pile feeder


Specifications:

Sheet size: Max of 15 x 18" wide, Min of 5" x 7 1/2"
Sheet weight: 20lb to 17 point board stock
Cycling rate: 5,500 cph at 8 1/2" x 11" format
Power: 115VAC, 15A 60hz
Air: 3 cfm  60psi
Weight: 450 lbs. approx.
Floor Space: 110" x 28"
Price: Call for current pricing
Delivery: 1 to 2 months

 

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

 

ryan.gif (2811 bytes) Contact Wesley Overstreet at Ryan Capital at 800-541-6370 for Leasing Programs
Send mail to Webmaster@Adventmachine.com with questions or comments about this web site.
Copyright © 1999 Advent Machine & Tool Inc.
Last modified: December 06, 2001